Tronair 02A7913C0100, Руководство по эксплуатации и обслуживанию

Страница: 7 / 77

12/03/2020 | Rev. 03 Page | 4
6.0 OPERATION
6.1 OPERATING PARAMETERS:
•
The user shall work in accordance with the Operator Manual
•
It is not allowed to work under the raised load until it is secured by suitable means, i.e. Ram Locknut
•
The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces
•
Operate between -20

C and 50

C/-4

F and 122

F
•
Hydraulic pump operates with 90
– 145 psi (6.21 – 10 bar) air pressure
6.2
NUMERICAL VALUES
•
Rated Capacity ......................... 60,000 lbs (27,216 kg)
•
Minimum Closed Height ........... 45.7 in (116.1 cm)
•
Mechanical Extension .............. 4 in (10.2 cm)
•
Hydraulic Extension ................. 1st Stage: 19 in (48.3 cm)
2nd Stage: 20 in (50.8 cm)
•
Maximum Height Obtainable .... 88.7 in (225.3 cm)
•
Weight ...................................... 800 lbs (363 kg)
•
Noise level is 64 dB(A) at a distance of 120 in (3,048 mm) at an inlet pressure of 100 psi (6.9 bar)
6.3
OPERATOR CONTROLS
6.4
OPERATING INSTRUCTIONS
The user should be familiar with the following statements prior to using the jack(s):
CAUTION!
1. Never put hands between the aircraft and the jack pad; as after aircraft has been lowered, struts may
have hung up.
2. Never align jack under aircraft by pounding on jack legs. Dented legs may lead to jack collapse.
3. Always lower ram locking nut(s) after jack is under load. Be sure ram nut(s) is seated fully after
jacking.
4. Always raise and lower jacks simultaneously so that aircraft remains level.
5. Always use a tail or nose stand, as applicable, for additional stability.
6. Air pump should only be used to raise the jack quickly up to the aircraft, the hand pump should be
used to lift the aircraft.