Tronair 02-7836C0110, Руководство по эксплуатации и обслуживанию

Страница: 4 / 39

Model: 02-7836C0110
12 Ton (10.87 Metric) Axle Jack
08/2010| Rev. 02 Page | 1
This product can not be modified without the written approval of Tronair, Inc. Any modifications done without written approval
voids all warranties and releases Tronair, Inc., its suppliers, distributors, employees, or financial institutions from any liability
from consequences that may occur. Only Tronair OEM replacement parts shall be used.
1.0 DESCRIPTION
The Tronair Model 02-7836C0110 Hydraulic Axle Jack incorporates the following quality features:

Steel construction

Three-stage telescoping ram

Quick action mechanical extension

Single speed, manually operated pump

Uses standard MIL-PRF-5606 hydraulic fluid

Preset relief/release valve
2.0 USAGE
The purpose of this jack is to lift aircraft for maintenance.
Maximum capacity of this jack is 12 tons (10.87 metric tons).
3.0 SPECIFICATIONS

Vertical capacity: 24,000 lbs (10.87 metric tons)

Minimum closed height: 4.00 in (10.16 cm)

Mechanical extension: 1.37 in (3.48 cm)

Hydraulic extension: 5.63 in (14.30 cm)

Maximum height obtainable: 11.00 in (27.94 cm)

Weight: 60.00 lbs (27.00 kg)

BUNA 'N' Seals
4.0 ASSEMBLY INSTRUCTIONS
4.1 GENERAL INFORMATION
This product should be assembled and/or repaired using good workmanship practices and proper tools.
All replacement parts must be the same as or equal to the original parts supplied.
4.2
PRE-USE CHECKS
Reference the Illustrated Parts List - Pages 4 & Error! Bookmark not defined. to identify and ensure that all parts are
present.

Generally check over unit to assure the tightness of all nuts, bolts and screws.

With rams completely collapsed, check hydraulic fluid level; between 0.50 and 0.75 inches (1.27 and 1.91 cm) from top of
reservoir fitting. Replenish with MIL-PRF-5606 fluid as required.
5.0 OPERATING INSTRUCTIONS
The user should be familiar with the following statements prior to using the jack(s).
CAUTION!
1. Aircraft jacking adaptors must rest in jack pad.
2. Never put hands between aircraft and jack pad.
3. Always open reservoir vent screw before operating
5.1
JACK INSTRUCTIONS
To Raise Aircraft:
1. Place jack on a hard level surface.
2. Raise jack as close to aircraft jack pad as possible. Screw out the center mechanical extension for final adjustment.
3. Open reservoir vent screw.
4. Close pump release valve and operate pump.
To Lower Aircraft:
1. Loosen pump release valve slightly to slowly lower aircraft.