Tronair 02-7813C0100, Руководство по эксплуатации и обслуживанию

Страница: 4 / 43

Models: 02-7813C0100, 02-7813C0100-A5, 02-7884C0400
12 Ton Two Stage Hydraulic Axle Jack
02/2021 | Rev. 06 Page | 1
This product can not be modified without the written approval of Tronair, Inc. Any modifications done without written approval
voids all warranties and releases Tronair, Inc., its suppliers, distributors, employees, or financial institutions from any liability
from consequences that may occur. Only Tronair OEM replacement parts shall be used.
1.0 PRODUCT INFORMATION
1.1 DESCRIPTION
The Tronair Model 02-7813C0100, 02-7813C0100-A5 and 02-7884C0100 Hydraulic Axle Jacks incorporate the following
quality features:
•
Steel construction
•
Two-stage hydraulic extension
•
Two stage mechanical extension
•
Single speed, manually operated pump
•
Uses standard MIL-PRF-5606 hydraulic fluid
•
Preset relief/release valve
•
Two sizes of base spacer blocks
1.2
MODEL & SERIAL NUMBER
Reference nameplate on unit
1.3
MANUFACTURER
TRONAIR , Inc. Telephone: (419) 866-6301 or 800-426-6301
1 Air Cargo Pkwy East Fax: (419) 867-0634
Swanton, Ohio 43558 USA E-mail: sales@tronair.com
Website: www.tronair.com
1.4
USAGE
The purpose of this jack is to lift aircraft for maintenance. It has a maximum capacity of 12 tons (106.75 kN).
Optional Kit K-1945 is offered which includes one each of the two different base spacer blocks. These may be required on
some aircraft in order to raise the jack closer to the jack pad.
1.5
SPECIFICATIONS
Vertical capacity .............................. 24,000 lbs (106.75 kN)
Minimum closed height .................... 4.63 in (11.76 cm)
Mechanical extension ...................... 4.50 in (11.43 cm)
Hydraulic extension ......................... 6.00 in (15.24 cm)
Maximum height obtainable ............ 15.13 in (38.43 cm)
Weight ............................................. 40 lbs (177.93 N)
BUNA 'N' Seals
NOTE: These numbers increase accordingly when base spacer blocks are used.
2.0 SAFETY INFORMATION
2.1 USAGE AND SAFETY INFORMATION
To insure safe operations please read the following statements and understand their meaning. Also refer to your equipment
manufacturer’s manual for other important safety information. This manual contains safety precautions which are explained
below. Please read carefully.
WARNING!
— Warning is used to indicate the presence of a hazard that
can cause severe personal injury,
death, or substantial property damage if the warning notice is ignored.
CAUTION!
— Caution is used to indicate the presence of a hazard that
will or can cause minor personal injury
or property damage if the caution notice is ignored.
3.0 ASSEMBLY INSTRUCTIONS
3.1 GENERAL INFORMATION
This product should be assembled and/or repaired using good workmanship practices and proper tools.
All replacement parts must be the same as or equal to the original parts supplied.
3.2
PRE-USE CHECKS
Refer to the Illustrated Parts List to identify and ensure that all parts are present.
•
Generally check over unit to assure the tightness of all nuts, bolts and screws.
•
With rams completely collapsed, check hydraulic fluid level is between one- half (1/2) and three-quarter (3/4) inches from
top of reservoir fitting. Replenish with MIL-PRF-5606 fluid as required.