TROMMELBERG TXB30Y, Руководство пользователя

Страница: 15 / 32

USER MANUAL TXB30Y, V16.01 page | 15
Technical changes, misprints and errors are reserved
8. Adjustment of the synchronism:
- If the adjustment of the synchronism is necessary, perform the
following steps
o
raise the lift to its max. height, to determine the actual amount
of difference between the two platforms
o
the valve (I or H) of the lower platform remains closed at all
time
o
now press the
„DOWN“ button and open the valve (I or H) of
the higher platform at the same time
o
as soon as both platforms are at the same level, close the
previous opened valve (I or H)
o
when both valves (I and H) are closed again, press the
„DOWN“ button to lower the lift to its lowest position
o
raise the lift to its max. height and observe the synchronism of
the platforms
o
if there are still height differences, repeat the previous
described steps, as long as the synchronization is guaranteed
for 100%
- After the adjustment of the synchronism you can use the lift to lift
vehicles, which does not exceed the max. lifting capacity
9. Working conditions:
- Ambient temperature between 5°C - 40°C.
- Relative humidity between 30-95%
(non condensing!)
- Transportation and storage temperature shall be between -25°C
–
+55°C and short period, not exceeding 24 hours at up to +70°C.
- Installation altitude max. 1000m
10. Disposal of the hydraulic oil* according to the appropriate local
environmental regulations, only.
* Hydraulic oil is not included in the scope of delivery