SAFETY INSTRUCTIONS
Your child’s safety is your responsibility.
.
and use only spare parts
approved by the manufacturer.
or place close to another product
WARNING : Do not use more than one mattress in the cot.
maximum
WARNING: Always ensure the dropside is in the closed upper fixed position if you are leaving the
child unattended in the cot.
Mattress base length and width shall be such that the gap between the mattress and the
sides and ends does not exceed 30mm.
20
6
and maximum thickness 10 cm.
and retighten as necessary.
To prevent injury from falls, when the child is able to climb out of the cot, the cot shall no longer
be used for that child.
Remove all parts from packaging and check against the parts list.
Do not discard any packaging until you are sure you have all parts and the pack of fittings.
You will find it easier to assemble the cot if a second adult is available to help you.
WARNING : Be aware of the risk of open fires and other sources of strong heat, such as
electric bar fires, gas fires etc in the near vicinity of the cot
WARNING : Do not use if any part of the cot is broken, torn or missing
WARNING : Do not leave anything in the cot
, which could
provide a foothold or present a danger of suffocation or strangulation e.g. strings,
blind/curtain cords etc.
One end of the cot has a mark indicating the
height of the mattress.
The thickness of the mattress must not reduce the internal depth from mattress surface to
top of the cot side above it to less than 500 mm in the lowest position and 200 mm in the
highest position of the mattress base.
The lowest mattress base positions is the safest and should always be used as soon as the
baby is old enough to sit up.
The recommended mattress size for the cot is 1
x 0 cm
Check regularly to ensure that all the components are secure
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.
CUSTOMER ENQUIRIES
www.troll.lv
