Trolex XD One, Руководство пользователя

Страница: 67 / 80

67
The maintenance of the Air XD must only be carried out by competent personnel.
Maintenance should be considered with reference to the local safety regulations, authorities,
and guidelines.
“Periodic visual checks should be carried out to assess if there are any issues arising with the Air
XD instrument. Check for:
1. External damage to the instrument. Plastic parts should not be cracked or broken, which could
affect the IP rating of the instrument.
2. Internal or external damage to wiring that is connected to the Air XD instrument.
3. Labels on the instrument are still in place and are not peeling or discolouring.
14.1 Visual checks
14.2 Cleaning labels
It is recommended to periodically clean the instrument with a damp cloth, to ensure the
display, keypad and rating labels are clean and legible .
14.3 Air entry/exit apertures
The Air XD has been designed to allow for infrequent pressure washing during maintenance
schedules.
Note: Ensure inlet cap is closed before pressure washing the Air XD instrument.
It is important that an appropriate distance is kept between a pressure washer and all Air XD
surfaces when cleaning to avoid any damage to the surface being cleaned. Care should also
be taken to ensure that the underside of the instrument is not subject to the direct water jet to
ensure that water does not enter the air flow path.
The air exit aperture is protected by a stainless steel grille to minimise the ingress of debris
into the instrument. It is recommended that the grille it is checked and cleaned during
maintenance periods.
It is recommended that the Air XD is installed with location and proximity consideration to
atomising dust suppression systems.
Instrument readings will include atomised or misted sizes that pass through the Air XD sensor,
within the particle detection range.
14.4 Filter replacement
14. MAINTENANCE
Air XD_User manual_P5628.1600_Rev D