Trojan TrojanUVMax G Скачать руководство пользователя страница 2

WARNING – 

To guard against injury, basic safety precautions should be observed, including the following:

 READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

 DANGER – To avoid possible electric shock, special care should be taken since water is employed in the use of this system. Unless a 
situation is encountered that is explicitly addressed by the provided maintenance and troubleshooting sections, do not attempt repairs 
yourself; refer to an authorized service facility.
 CAUTION - Do not operate with broken or faulty parts as this may result in exposure to ultraviolet radiation. Contact supplier for replacement 
parts.
Do not operate the system if it has a damaged cord or plug, or if it is malfunctioning or if it has been dropped or damaged in any manner.
 Always unplug the system, shut off water flow and release water pressure before servicing or cleaning. Never yank cord to remove from 
outlet; grasp the wall plug and pull to disconnect.
 Do not use the system for other than intended use. The use of attachments not recommended or sold by the manufacturer may cause an 
unsafe condition.
To prevent risk of electrical shock, connect this system only to a properly grounded, grounding-type power supply receptacle that is 
protected by a Ground Fault Circuit Interrupter (GFCI). Inspect performance of GFCI as per manufacturer’s suggested maintenance 
schedule. If an extension cord is used, ensure it is of a sufficient rating and accepts the plug from this system; never use an adapter.
 Visually inspect this system prior to installation. If the quartz sleeve or lamp is broken, cracked or damaged in any way, do not use. Contact 
the supplier for replacement parts.
 Keep all connections dry and off the ground. Do not touch plug with wet hands.
 The light emitted by the lamp will cause serious eye damage and burn unprotected skin. Do not plug system into an electrical outlet without 
first properly securing the lamp into the chamber. Unplug the system prior to removing the lamp from the chamber. 
 If the UV system malfunctions or fails, water must be boiled prior to consumption until the UV system is operational and the water lines have 
been shocked. System failure is indicated by the system’s audible and visual alarms or the absence of any indicator light.
 Intended for indoor use only. System must not be exposed to weather elements. In seasonal applications, chamber must be drained to 
prevent freezing.
 Installation of this system must be in accordance with local plumbing and electrical codes as well as any and all applicable regulations and 
laws.

 SAVE THESE INSTRUCTIONS.

Note: maximum pressure rating is 100 PSI (6.89 bar)

1.

2.

3.

4.
5.

6.

7.

8.

9.
10.

11.

12.

13.

14.

SAFETY INSTRUCTIONS

GROUNDING

This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce 
the risk of electrical shock. This system is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must 
be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electrocution. Check with a qualified electrician 
or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with this system – if it will 
not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this system.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

To comply with the National Electrical Code (NFPA 70) and to provide additional protection from the risk of electric shock, this system should 
only be connected to a properly grounded, grounding-type power supply receptacle that is protected by a Ground Fault Circuit Interrupter 
(GFCI). Inspect operation of GFCI as per manufacturers suggested maintenance schedule.

EXTENSION CORDS

If an extension cord is necessary, use only 3-wire extension cords that have 3-prong grounding-type plugs and 3-pole cord connectors that 
accept the plug from this system. Use only extension cords that are intended for outdoor use. Use only extension cords having an electrical 
rating not less than the rating of the system.  A cord rated for less amperes or watts than this system rating may overheat. Exercise caution when 
arranging the cord so that it will not be tripped over or pulled. Do not use damaged extension cords. Examine extension cord before using and 
replace if damaged. Do not abuse extension cord. Keep extension cord away from heat and sharp edges. Always disconnect the extension cord 
from the receptacle before disconnecting this system from the extension cord. Never yank cord to pull plug from outlet. Always grasp the plug 
and pull to disconnect.

WARNING – To prevent risk of electrical shock, connect this system only to a properly grounded, grounding-

type power supply receptacle that is protected by a Ground Fault Circuit Interrupter. Pull plug before 

servicing or replacing lamp. Keep all connections dry and off the ground. Do not touch plug with wet hands.

WARNING – Read manual before installing or servicing this system. Only authorized personnel possessing a 

strong understanding of this system should attempt to replace lamp or service this system. 

WARNING – Do not look directly at UV lamp when it is operating. The light emitted by the lamp will cause 

serious eye damage and burn unprotected skin. 

NOTE – Maximum pressure rating is 100 PSI (6.89 bar)

Содержание TrojanUVMax G

























Отзывы: