Trojan TOUR 370, Инструкция и руководство по сборке

Страница: 8 / 26

10267 - 8
Instructions for assembly
• Unpack the carton and place all parts on the floor carefully.
• Remove the packing material and check all parts are accounted for.
• Tools are provided for use in assembly.
4. ASSEMBLY STEPS
STEP 1: STABILISER ASSEMBLY
• Attach the Front Stabiliser (2) to the Main Frame (1) and secure with two Carriage Bolts (16),
two Curved Washers (18) and two Domed Nuts (17).
• Attach the Rear Stabiliser (3) to the Main Frame (1) and secure with two Carriage Bolts (16),
two Curved Washers (18) and two Domed Nuts (17).
STEP 2: FRONT POST ASSEMBLY
• Insert the Front Post (4) through the Small Cover (11) and join
the Middle Computer Wire (21) to the Lower Computer
Wire (20).
• Insert the Front Post (4) into the Main Frame (1) and secure
using four Allen Screws (22) and four Curved Washers (23).
Move the Small Cover (11) down into position.
CAUTION:
Ensure that cables are not damaged
during assembly or when tightening screws.