Trojan iSMART 600, Инструкция по уходу и руководство по сборке

Страница: 13 / 32

1575-13
STEP 04
• Attach left/right Connect Frame (15, 14) to Top Frame(3) using Pivot Shaft (40) 6-little Oil Bushings (61) 2-5/8” Wash-
ers (88) 2-5/8” Locknuts (85). 2-5/8” plastic Dome Caps (104)
• Attach Press Arm (6) to ends of left/right Connect Frame (15, 14) using big Pivot Shaft (39) 2-Copper Bushings (62)
2-5/8” Washers (88) 2-5/8” Lock Nuts (85) 1-long Pop Pin (43). 2-5/8” Plastic Dome Caps (104)
• Install two Pulleys (46) between left/right Connect Frames (15, 14) using 2 3/8”x8-3/4” Hex Bolts (93) 4-long Bushings
(63) 4 3/8” Washers (86)2-3/8” Lock Nuts (83).
• Attach VKR Frame (122) to left Rear Upright (8l) using 2 3/8”x3” Hex Bolts (75) 2-3/8” Lock Nuts (83).
• Install handle Tube (125) to VKR Frame (122) using 2-M10x25mm Screws (135) 2-3/8” Washers (86)
• Install Backrest Cushion 3 (127) to VKR Frame (122) using 2-M8x16mm Hex Bolts (134) 2-8mm Washers (99)
• Install two VKR Arm Curl Pad (126) to VKR Frame (122) using 4-m8x63mm Hex Bolts (136)
4-8mm Washers (99).
• Attach Seat Support Frame (110) and Rectangle Patch (36) to Right Rear Upright (8r) using 2 3/8”x3” Hex Bolts (75)
4 3/8” Washers (86) 2-3/8” Lock Nuts (83).
• Attach 2 Seat Support Post (111) to Seat Support Frame (110) and Base Frame (109) using 2-3/8”X4-3/4” Hex Bolts
(137) 4 3/8” Washers (86) 2-3/8” Lock Nuts (83).
ASSEMBLY STEP
50
104
86
50
85
88
50
104
93
63
52
57
86
62
52
50
57
6
104
88
43
83
85
15
50
40
50
61
88
14
85
8R
63
46
61
86
3
61
85
88
39
104
126
127
54
54
125
125
131
131
122
75
86
134
99
136
136
99
99
126
135
86
86
135