Trojan CADENCE 420, Руководство пользователя

Страница: 11 / 25

11
ASSEMBLY STEPS
1. PREPARATION
• Before assembling make sure that you will have enough space around the item.
• Use the supplied parts and hardware for the assembly.
• Before assembling, please check whether all the required parts have been supplied as per the exploded
drawing on the opposite page.
STEP 1: STABILISER
ASSEMBLY
Attach the Front Stabiliser (3) to the
front of the Main Frame (1) using
2 Carriage Bolts (M10 x 55 mm) (6),
2 Flat Washers (M10 x 22 mm) (4)
and 2 Domed Nuts (M10) (5). Attach
the Rear Stabiliser (2) to the rear of
the Main Frame (1) using 2 Carriage
Bolts (M10 x 55 mm) (6), 2 Flat
Washers (M10 x 22 mm) (4) and
2 Domed Nuts (M10) (5).
STEP 2: HANDLEBAR POST
ASSEMBLY
Connect the Middle Console Wire (25)
in the Handlebar Post (13) to the Lower
Console Wire (24) in the Main Frame (1).
Insert the Front Post (13) into the Main
Frame (1). Secure using 4 Allen Screws
(M8 x 16 mm) (27) and 4 Curved Washers
(M8 x 20) (26).
STEP 1
STEP 2