Troglotech T812 Pan & Tilt Camera User Manual Page 4
OPERATION GUIDE
Standard Operation
When the T812 is fitted to the Troglotech T804 push-rod system and the system
switched ON, the
T812 camera will perform a short calibration routine
. During
the calibration routine the Tilt mechanism will turn and the picture will rotate on the
T804 screen as the internal picture sensor rotates. After a few seconds the main
rotate mechanism will adjust the camera to an upright position, the pan
mechanism will face forward and the picture will auto-upright. The camera is now
ready for use.
When operating the camera using the
T804 keyboard, the camera can be set
to view straight-ahead and the Focus
pre-set to 6”- infinity by pressing the
‘Centre’ button on the keyboard as
shown to the right here.
Always use this button after operating
the camera pan, tilt and focus controls.
