PRODUCT FEATURES
•
1/3” Sony HAD II CCD
•
540TVL
•
2.8-10mm / F1.2 Varifocal Auto Iris Lens
•
Mechanical IR Push Filter (ICR)
SAFETY PRECAUTIONS
•
The installation should be made by a qualified service person and should be complied with
all local codes.
•
Only use class 2 regulated power supply as 12VDC power source.
•
To prevent fire or electrical shock, UL listed class 2 wiring should be used for the power
supply.
•
Make sure the ceiling / wall is strong enough to support the weight of the camera.
•
Do not attempt to disassemble the camera. There are no user-serviceable parts inside. The
warranty will be voided if the seal is broken.
•
Do not attempt to aim the camera directly at the sun or other extremely bright objects.
This can damage the image sensor.
•
Do not place the camera under the following locations.
1.
Extremely high or low temperatures
(Operating temperature: -10°C to +50°C [10°F to 122°F])
2.
High levels of humidity and dust
(Operating humidity: max 80% no condensation)
3.
Locations where there are large amounts of water vapor and steam.
•
Avoid strong impacts or shocks. The camera could be damaged by improper handling or
storage.
•
Be sure to use the proper screws to mount the camera on the wall or ceiling.
Version: 20100406
Model:
TFD-2210
Vandal Resist IR Dome Camera
OPERATION INSTRUCTION
CONTENT LIST
•
TFD-2201 1
pc
•
Operating Instruction
1 pc
•
Torx Wrench
1 pc
•
Pigtail cable
1 pc
•
Tapping Screws
3 pcs
•
Plastic Anchors
3 pcs
PART DISCRIPTION
•
12VDC/24VAC Dual Voltage
•
Dynamic Noise Reduction
•
3-axis design
DC LEVEL
L.L
V.P
AES
AGC
BLC
F.L
OFF
NOM
OFF
OFF
1. Far
/
Near
2. Wide
/
Tele
3. DC
Level
Adjust the IRIS level of the Auto Iris Lens
4. Dip
Switches
AES: Automatic Electronic Shutter
Turn off when Auto Iris lens is used
BLC: Backlight Compensation
Turn on when there is a strong backlight to enhance the foreground
AGC: Automatic Gain Control
Gain adjusted from 0 to 26dB automatically
FL: Flickerless
Change the shutter speed to 1/120sec
5. Secondary DC Power Input
6. Service
Port
2nd video output for service monitor
7. Power
Input
Support 12VDC or 24VAC
8. Video
Output
