TRIVIEW TDVB-SDB2, Руководство пользователя, Страница: 10 / 16

8. REMOTE CONTROL - BASICS
8.1 Turn on receiver
Plug on power cord connector to outlet. Or press
Power button on the front panel or remote
control when STB is standby.
Frequently Asked Questions
Question: Power cord connector was plugged on
and receiver is not in standby mode, but nothing
is displayed on TV screen?
Answer: Make sure that receiver is connected to right
TV input; e.g. when you connect receiver to
connection Video 1, TV had to be set on source Video
1.
Question: Power cord connector was plugged on
and receiver is not in standby mode, but TV
screen display information “ No signal” or “ Weak
signal” .
Answer: This mean there is no signal on this channel.
A few reasons can cause this effect:
1. Dish is set on differ satellite than chosen channel
become from.
2. signal of this channel is not strong enough. Try to
choose other channel. If necessary set properly
dish position or contact with Your Local Dealer or
Servicing.
8.2 Standby Mode
1. By pressing Power button receiver is going
from operational mode to standby mode.
2. By pressing Power button receiver is going
from standby mode to full screen mode on last
watching channel.
8.3 PAUSE
When you press PAUSE button while receiver is
in playing mode, will pause playing. Start playing
again, please press
PAUSE once more.
8.4 Mute
1. Press the button (Mute) on remote control
to turn off sound. On the screen appears symbol:
.
2. Press the button (Mute) once more to turn on
sound.
8.5 Next / Previous channel
When receiver is in full screen mode, if you want to
change channel, you can press
▲ , ▼ buttons on
remote control or front panel.
8.6 Volume
When receiver is in full screen mode, to change
volume press
◄ , ► or , VOLUME-
buttons on remote control; left to decrease, right to
increase sound.
8.7 Satellite list
To change satellite, press OK button to go from
full screen mode to channel list and then SAT
button. Use ◄ , ► to choose satellite from list and
confirm by OK button. To choose certain channel
use ▲ , ▼ buttons.
8.8 Channel list
1. When receiver is in full screen mode, press the
button OK or SAT to display TV channels
list. More info in TV List Menu description.
2. To back to full screen mode, press OK or
EXIT button.
12.1 My Album
Choose this option to view pictures stored on
connected to receiver USB stick.
12.2 My Music
Choose this option to change your receiver and
connected into MP3 Player.
12.3 My Movie
Choose this option to change your receiver and
connected into Movie Player.