Triumph Tiger 900 GT, Руководство пользователя

Страница: 71 / 204

General Information
71
Warning
Only operate this Triumph motorcycle
at high speed in closed-course on-
road competition or on closed-course
racetracks.
High speed operation should only
then be attempted by riders who have
been instructed in the techniques
necessary for high speed riding and
are familiar with the motorcycle's
characteristics in all conditions.
High speed operation in any other
circumstances is dangerous and will
lead to loss of motorcycle control and
an accident.
Note
Cruise control may not function if there
is a malfunction with the ABS system
and the ABS warning light is illuminated.
Cruise control will continue to function if
a riding mode is selected with ABS set
to Off-Road or Off.
Cruise control will continue to function if
ABS has been disabled.
The cruise control buttons are located
on the left hand switch housing and can
be operated with minimum movement
by the rider.
1
2
1. Cruise control RES/+ button
2. Cruise control SET/- button
Cruise control can be switched on or off
at any time but it can not be activated
until all the conditions described on
page 71 have been met.
Activating Cruise Control
To turn on the cruise control system,
press the SET/- button. The cruise
control symbol will be shown in the
display screen. The cruise control set
speed will be shown as ‘—’ indicating
that a speed has not yet been set.
To activate cruise control, the following
conditions have to be met:
• The motorcycle must be travelling
at a speed between 19 to 100 mph
(30 to 160 km/h).
• The motorcycle must be in 3
rd
gear
or higher.