Triumph Tiger 850 Sport 2020, Руководство пользователя

Страница: 162 / 200

Maintenance
162
Should the battery voltage fall below
12.7 Volts, the battery should be charged
using a Triumph approved battery
charger. Always remove the battery
from the motorcycle and follow the
instructions supplied with the battery
charger.
For extended periods of storage
(beyond two weeks) the battery should
be removed from the motorcycle and
kept charged using a Triumph approved
maintenance charger.
Similarly, should the battery charge
fall to a level where it will not start the
motorcycle, remove the battery from
the motorcycle before charging.
Battery Installation
Warning
Make sure that the battery terminals
do not touch the motorcycle frame.
This may cause a short circuit or spark
which would ignite battery gases
causing a risk of personal injury.
To install the battery:
• Place the battery in the battery
case.
• Reconnect the battery, positive
lead (red protective cover) first and
tighten the battery terminals to
39.8 lbf in (4.5 Nm).
1
4
2 3
1. Positive (+) terminal
2. Battery strap
3. Battery cover
4. Negative (-) terminal
• Apply a light coat of grease to the
terminals to prevent corrosion.
• Cover the positive terminal with the
red protective cap.
• Reinstall the battery cover.
• Reinstall the battery strap.
3
1 2
1. Tool kit tray (if equipped)
2. Diagnostic connector
3. Tool kit tray fastener