Triumph Tiger 800, Руководство пользователя

Страница: 32 / 136

32
General Information
When the tyre pressure monitoring system
has been selected, —— psi or bAr will be
visible in the display screen until the
motorcycle is travelling at a speed greater
than 12 mph (20 km) and the tyre pressure
signal is received.
To exit the tyre pressure display, press and
release button 'A' to the desired display.
Sensor Batteries
When the battery voltage in a pressure
sensor is low, LO bAt will be displayed and
the TPMS symbol will indicate which wheel
sensor has the low battery voltage. If the
batteries are completely flat, only dashes will
be visible in the display screen, the red TPMS
warning light will be on and the TPMS
symbol will flash continuously. Contact your
authorised Triumph dealer to have the sensor
replaced and the new serial number
recorded in the spaces provided on page
31 .
1. TPMS symbol
2. Display screen
3. Front tyre, identified
4. Rear tyre, identified
5. TPMS warning light
With the ignition switch turned to the ON
position, if the TPMS symbol flashes for
10 seconds and then remains on there is a
fault with the TPMS system. Contact your
authorised Triumph dealer to have the fault
rectified.
Tyre Pressures
The tyre pressures shown on your instrument
panel indicate the actual tyre pressure at the
time of selecting the display. This may differ
from the inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre to
expand and the inflation pressure to increase.
The cold inflation pressures specified by
Triumph take account of this.
Owners must only adjust tyre pressures when
the tyres are cold using an accurate tyre
pressure gauge (see page
100 ), and must not
use the tyre pressure display on the
instruments.
cgjp_7
5
4
3
2
1
Warning
The tyre pressure monitoring system is not
to be used as a tyre pressure gauge when
adjusting the tyre pressures. For correct
tyre pressures, always check the tyre
pressures when the tyres are cold and
using an accurate tyre pressure gauge (see
page
100 ).
Use of the TPMS system to set inflation
pressures may lead to incorrect tyre
pressures leading to loss of motorcycle
control and an accident.