General Information
122
Seats
Seat Care
Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat.
Do not lean the seat against the
motorcycle or any surface which may
damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
For seat cleaning information, see
.
Passenger Seat
The seat lock is located on the rear
fender, below the brake/tail light unit.
1
1.
Seat lock
To remove the seat:
• Insert the ignition key into the seat
lock and turn it counterclockwise
while pressing down on the rear of
the seat. This will release the seat
from its lock and allow it to be slid
rearwards.
• If equipped with heated seats,
disconnect the heated seat’s
electrical connector for complete
removal from the motorcycle.
To re-install the seat:
• Reconnect the heated seat’s
electrical connector (if
equipped),
engage the seat's two outer
brackets under the loops on the
subframe and the two inner
brackets to brackets on the rider's
seat.
• Gently push the seat forwards and
press down at the rear to engage
in the seat lock.
1
2
3
1
4
1.
Passenger seat outer brackets
2.
Subframe loops
3.
Passenger seat inner brackets
4.
Rider seat brackets
