Cleaning and Storage
212
Cleaning of the Exhaust
System
All parts of the exhaust system of your
motorcycle must be cleaned regularly to
avoid a deterioration of its appearance.
These instructions can be applied to
chrome, brushed stainless steel and
carbon fiber components; matt painted
exhaust systems should be cleaned as
above, noting the care instructions in
the Matt Paintwork section previously.
Note:
• The exhaust system must be cool
before washing to prevent water
spotting.
Washing
Wash as previously described.
Make sure that no soap or water enters
the exhausts.
Drying
Dry the exhaust system as far as
possible with a soft cloth or chamois
leather. Do not run the engine to dry
the system or spotting will occur.
Protecting
Caution
The use of products containing silicone
will cause discoloration of the chrome
and must not be used. Similarly, the
use of abrasive cleaners will damage
the system and must not be used.
When the exhaust system is dry, apply
a suitable proprietary motorcycle pro-
tection spray onto the surface, following
the manufacturer’s instructions.
It is recommended that regular
protection be applied to the system as
this will both protect and enhance the
system's appearance.
Seat Care
Caution
Use of chemicals or high pressure
spray washers is not recommended for
cleaning the seat.
Using chemicals or high pressure spray
washers may damage the seat cover.
To help maintain its appearance, clean
the seat using a sponge or cleaning
cloth with soap and water.
