Triumph Tiger 1200 GT 2021, Руководство пользователя

Страница: 108 / 192

HOW TO RIDE THE MOTORCYCLE
108
Hill Hold Control
Hill hold control assists the rider in
making hill starts. The system (when
activated) will apply the rear brake
to hold the motorcycle in position.
The system will then automatically
deactivate and release the rear brake
when it detects that the rider is
attempting to move off.
Warning
Avoid activating the hill hold control
system on slippery surfaces.
The hill hold control system will not be
able to prevent the motorcycle from
slipping, if it is activated on a surface
where there is insufficient levels of
tyre grip to hold the motorcycle in
position.
Activating the hill hold control system
on a slippery surface could cause the
motorcycle to slip, leading to loss of
motorcycle control and an accident.
Warning
The hill hold control system will
deactivate if the side stand is moved
to the down position, the ignition is
switched off, the engine stop switch
is moved to the STOP position or if
the engine is stopped for any other
reason.
The hill hold control system will also
deactivate if a fault occurs which
causes the Malfunction Indicator Light
(MIL) to illuminate.
In these circumstances, the front
brake must be manually applied to
prevent the motorcycle from rolling.
Failure to prevent the motorcycle from
rolling may lead to loss of motorcycle
control and an accident.
Caution
The hill hold control system is not
designed to be used as a parking
brake.
Do not continually activate the hill
hold system for periods of longer than
10 minutes.
Continuous activation of the hill hold
control system for periods of longer
than 10 minutes may cause damage to
the ABS system.
Activation
The following conditions must be met
before hill hold control can be activated:
▼
The engine must be running
▼
The side stand must be in the up
position
▼
The motorcycle must be stationary.