Triumph Scrambler 1200 XC Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 640

Triumph Scrambler 1200 XC Скачать руководство пользователя страница 6

WARNING

Many liquids and other substances used in motor vehicles are poisonous and
should under no circumstances be consumed and should, as far as possible, be
kept from contact with the skin. These substances among others include acid,
antifreeze, asbestos, brake fluid, fuel, lubricants, and various adhesives. Always
pay close attention to the instructions printed on labels and obey the instructions
contained within. These instructions are included for your safety and well-being.
NEVER DISREGARD THESE INSTRUCTIONS!

Third Party Products

WARNING

Many proprietary products, such as chemicals, solvents and cleaning agents, will
cause damage to components if used incorrectly or inappropriately. Always follow
the manufacturer’s instructions printed on the product container’s labels and obey
the instructions given. These instructions are included for your safety and well-
being.
Damage to the motorcycle components caused by the incorrect or inappropriate
use of chemicals, solvents and cleaning agents may reduce the components
efficiency, resulting in loss of motorcycle control and an accident.

Fluoroelastomers

WARNING

Fluoroelastomer material is used in the manufacture of various seals in Triumph
motorcycles.
In fire conditions involving temperatures greater than 315°C this material will
decompose and can then be potentially hazardous. Highly toxic and corrosive
decomposition products, including hydrogen fluoride, carbonyl fluoride, fluorinated
olefins and carbon monoxide can be generated and will be present in fumes from
fires.
In the presence of any water or humidity, hydrogen fluoride may dissolve to form
extremely corrosive liquid hydrofluoric acid.
If such conditions exist, do not touch the material and avoid all skin contact. Skin
contact with liquid or decomposition residues can cause painful and penetrating
burns leading to permanent, irreversible skin and tissue damage.

Oils

Service Manual - Scrambler 1200 XC

6 of 640

«
...
4
5
6
7
8
...
»

Содержание Scrambler 1200 XC

































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов