Triumph Daytona Moto2 765 2020, Руководство пользователя

Страница: 67 / 163

General Information
67
Rider's Seat
Warning
To prevent detachment of the seat
during riding, after fitting always
grasp the seat and pull firmly
upwards.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
2
2
1
1. Rider's seat
2. Fixings
To remove the rider's seat:
• Fold back the rear corners of the
seat's padding to reveal the fixings.
• Remove the fixings.
• Slide the seat rearwards for
complete removal from the
motorcycle.
To refit the rider's seat:
• Fit the seat, engaging the seat's
tongue under the fuel tank.
• Tighten the fixings to 9 Nm.
Fairings
Caution
To prevent damage to the fairings,
care must be taken not to drop or lean
a fairing against any surface which
may damage the fairing.
Put the fairing on a clean, flat surface
which is covered with a soft cloth.
Do not place any item on the fairing
which may cause damage.
Fairings - Removal
Note
Only the right hand fairing needs to be
removed to adjust the coolant level.
The cockpit does NOT need to be
removed when removing the fairings.
To remove the right hand fairing:
• Remove the rider's seat, see
page
67.
• Remove the battery strap.
• Disconnect the battery leads,
negative (black) lead first, see
page
129.
• Remove the cockpit infill panel, see
page
69.