Triumph Bonneville Bobber 2018 страница 88 Скачать руководство пользователя

Страница: 88 / 136

Maintenance

Drive Chain

cbnz

Warning

A loose or worn chain, or a chain that

breaks or jumps off the sprockets

could catch on the engine sprocket or

lock the rear wheel.
A chain that snags on the engine

sprocket will injure the rider and lead

to loss of motorcycle control and an

accident.
Similarly, locking the rear wheel will

lead to loss of motorcycle control and

an accident.

For safety and to prevent excessive

wear the drive chain must be checked,

adjusted and lubricated in accordance

with scheduled maintenance require-

ments. Checking, adjustment and lubri-

cation must be carried out more

frequently for extreme conditions such

as salty or heavily gritted roads.
If the chain is badly worn or incorrectly

adjusted (either too loose or too tight)

the chain could jump off the sprockets

or break. Therefore, always replace worn

or damaged chains using genuine

Triumph parts supplied by an authorised

Triumph dealer.

Drive Chain Lubrication

Lubrication is necessary every 200 miles

(300 km) and also after riding in wet

weather, on wet roads, or any time that

the chain appears dry.
To lubricate the drive chain:
• Use the special drive chain

lubricant as recommended in the

Specifications section.

• Apply lubricant to the sides of the

rollers then allow the motorcycle to

stand unused for at least eight

hours (overnight is ideal). This will

allow the oil to penetrate to the

drive chain O-rings etc.

• Before riding, wipe off any excess

oil.

• If the drive chain is especially dirty,

clean first and then apply oil as

mentioned above.

Caution

Do not use a pressure washer to clean

the drive chain as this may cause

damage to the drive chain components.

Содержание Bonneville Bobber 2018









































































































































Результаты поиска

Содержание Bonneville Bobber 2018

Отзывы:

Похожие инструкции для Bonneville Bobber 2018

Бренды по названию

Популярные бренды

Triumph Bonneville Bobber 2018, Руководство пользователя

Результаты поиска

Содержание Bonneville Bobber 2018

Отзывы:

Похожие инструкции для Bonneville Bobber 2018

Бренды по названию

Популярные бренды