background image

Maintenance

86

Brake Light Switches

Warning

Riding the motorcycle with defective 

brake lights is illegal and dangerous.
An accident causing injury to the rider 

and other road users may result from 

use of a motorcycle with defective 

brake lights.

The brake light is activated 

independently by either the front or 

rear brake. If, with the ignition in the ON 

position, the brake light does not work 

when the front brake lever is pulled or 

the rear brake pedal is pressed, have 

your authorized Triumph dealer 

investigate and rectify the fault.

Mirrors

Warning

Operation of the motorcycle with 

incorrectly adjusted mirrors is 

dangerous.
Operation of the motorcycle with 

incorrectly adjusted mirrors will result 

in loss of vision to the rear of the 

motorcycle. It is dangerous to ride a 

motorcycle without sufficient rearward 

vision.
Always adjust the mirrors to provide 

sufficient rearward vision before riding 

the motorcycle.

Warning

Never attempt to clean or adjust 

mirrors while riding the motorcycle. 

Removal of the rider’s hands from the 

handlebars while riding the motorcycle 

will diminish the ability of the rider to 

maintain control of the motorcycle.
Attempting to clean or adjust mirrors 

while riding the motorcycle may result 

in loss of control of the motorcycle and 

an accident.
Only attempt to clean or adjust the 

mirrors while stationary.

Содержание Bonneville Bobber 2016

























































































































Отзывы: