12
For Customer Service Call 1-888-996-2729
© 2019 Escalade Sports
All RIghts Reserved.
STEP 10
Connect
P11
Mechanical Scoring Arm sensor wires to
P9
Electronic Scorer as shown in
FIGURE 10.
Secure Elastic Loops from
P8
Ramp Chute to the back of
P7
Backboard attached Wing Nuts as shown
in
FIGURE 10.
Hook Elastic Loops over Wing Nuts in six locations as shown in FIGURE 10.
Connect
See”
FIRST TIME BATTERY INSTALLATION AND NOTICE
“ , before installing batteries, located on
page 17
P16
Scoring Control Box Wire to
P9
Electronic Scorer as shown in
FIGURE 10
and
DETAIL D.
Now attach
P17
Control Box to the right corner of the front U-Tube
P5
using
H8
Wing Bolt as shown in
FIGURE 11.
Run the rest of
P16
Control Wire through the loops on
P8
Ramp Chute.
This game has a Dual Power feature. You can insert 3 AA Batteries (not included) into the battery
compartment on the back of the Electronic Scorer
P9
--- OR --- use the A/C Adapter
A3
(provided) when
your shootout is close to a power source. Please remove the batteries when you are using the A/C Adapter.
P11
Elastic
Loop
Elastic
Loop
Elastic
Loop
Elastic Loop
Elastic Loop
FIGURE 10
NOTE:
Plug the mechanical
scoring arm plug into
backside of the electronic
scoreboard.
PARTS REQUIRED:
1 pc -
H8
Wing Bolt
A/C Adapter
1 pc -
P17
Control Box
1 pc -
P16
Scoring Control Box Wire
1 pc -
A3
ON
/ OF
F
DETAIL G
Control
Wire
Mechanical
Scoring
Arm
Sensor
Mechanical
Scoring
Arm
Sensor
P16
A3
Elastic
Loop
H8
P16
P17
FIGURE 11
P5
Install
P16
Control
Box Wire into Hook
and Loop Straps.
NOTE:
ON/OFF switch
located bottom of
electronic scorer.
Small phillips screwdriver
to remove and reinstall
battery cover
