2 of 4
Note:
•
Before fitting this accessory kit, ensure the
owner of the motorcycle has been informed of
the warnings contained in these instructions.
1.
Collect the right hand lower air deflector from the kit.
2.
Collect an edge trim and two edge trim finishers from
the parts kit. Position the edge trim over the outer
edge of the air deflector and secure in place using the
edge trim finishers.
1. Lower air deflector (right hand shown)
2. Edge trim
3. Edge trim finisher
3.
Remove the fixings from the lower air deflector bracket
and retain for use during installation.
1. Lower air deflector (right hand shown)
2. Fixings
3. Washers
4. Nuts
Warning
This accessory kit is designed for use on Triumph
Thunderbird LT motorcycles only and should not be fitted
to any other Triumph model or to any other
manufacturer’s motorcycle. Fitting this accessory kit to any
other Triumph model or to any other manufacturer’s
motorcycle, may interfere with the rider and could affect
the stability and handling of the motorcycle, leading to loss
of control and an accident.
Warning
Always have Triumph approved parts, accessories and
conversions fitted by a trained technician of an authorised
Triumph dealer. The fitment of parts, accessories and
conversions by a technician who is not of an authorised
Triumph dealer may affect the handling, stability or other
aspects of the motorcycle’s operation which may result in
loss of motorcycle control and an accident.
Warning
Throughout this operation, ensure that the motorcycle is
stabilised and adequately supported to prevent risk of
injury from the motorcycle falling.
Warning
Failure to tighten any of the fasteners to the correct torque
specification may result in loss of motorcycle control and
an accident. Always use a calibrated torque wrench.
T1904
1
2
1
2
3
3
1
T1904
2
4
1
3
