3 of 8
Note:
•
Triumph offers a broad range of approved
genuine accessories for your motorcycle.
We cannot therefore cover all possible
equipment variations in these instructions. For
removal and installation of Triumph Genuine
Accessories, always refer to the instructions
supplied with the respective accessory kit.
To obtain additional copies of any Triumph
accessory instructions, visit
www.triumphinstructions.com or contact your
authorised Triumph dealer.
Installing the Stem Assembly
1.
Remove the original top yoke nut, as described
in the Service Manual.
1. Top yoke
2. Nut
2.
Fit the new top yoke nut provided and tighten
to the torque specified for the original nut in
the Service Manual.
1. Top yoke
2. Nut
3.
Collect the stem, tapered nut and M6 x 40 mm
screw from the kit.
Warning
The accessory kits covered in this instruction are
designed for use on specific models of Triumph
motorcycle. The accessory kits and the models
applicable are listed at the start of the instruction.
They should not be fitted to any other Triumph
model or to any other manufacturer’s motorcycle.
Fitting an accessory kit to a Triumph model not
listed, or to any other manufacturer’s motorcycle
will affect the performance, stability and handling
of the motorcycle. This may affect the rider’s
ability to control the motorcycle and could cause
an accident.
Warning
Always have Triumph approved parts, accessories
and conversions fitted by a trained technician of
an authorised Triumph dealer. The fitment of
parts, accessories and conversions by a technician
who is not of an authorised Triumph dealer may
affect the handling, stability or other aspects of
the motorcycle’s operation which may result in
loss of motorcycle control and an accident.
Warning
Throughout this operation, ensure that the
motorcycle is stabilised and adequately supported
to prevent risk of injury from the motorcycle
falling.
2
1
2
1
