NOTE: We recommend that two adults work together to assemble this game.
Step 1
Find a clean, level place to begin the assembly of your billiard table. The table will be
assembled upside down and then turned over on its legs once the assembly is completed.
Step 2
Remove all the parts from the box and verify that you have all of the parts as shown on the
parts list above. Carefully cut or tear the four corners of the box so that the bottom of the box
can be used as your work surface.
Step 3
Place the pre-assembled cabinet (
#1
) face down in your work area.
Assembly Tips
:
Attention:
If you are using an electric screwdriver in the assembly, please set at low torque
and do not over tighten the hardware. When assembling individual parts, loosely tighten screws
until all screws are inserted, then tighten completely.
Assembly Instructions
2