Assembly Tips:
Attention:
If you are using an electric screwdriver in the assembly, please set at low torque
and do not over tighten the hardware. When assembling individual parts, loosely tighten screws
until all screws are inserted, then tighten completely
Assembly Instructions
1. Find a clean, level place to begin the assembly of your Air Hockey table. The table will be
assembled upside down and then turned over on its legs once the assembly completed.
This game table is heavy, and turning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown
on the parts identifier below. Carefully cut or tear the four corners of the box so that the
bottom of the box can be used as your work surface.
3. Attach the Left Leg (#2) and Right Leg (#3) to the Main Cabinet (#1) using three Bolts (#11)
and three Washers (#12) per Leg.
See FIG.1.
4. Attach the Leg Panel (#4) to the Leg using six Screws (#10) per Leg Panel.
See FIG.1.
5. Screw the Leg Leveler (#8) into the Leg.
See FIG.1.
FIG.1 LEG, LEG PANEL AND LEG LEVELER ASSEMBLY
FIG.1
#8
#2
#3
#3
#2
29
#4
#4
15
19
10
30
#10
#11
#12
#13
