TRIUMPH BOARD PJ1000 ST DLP Скачать руководство пользователя

Страница: 15 / 61

Installation



Contact the

nearest service

center if the

projector displays

these symptoms.

Warning Indicator

When the warning indicators (see below) come on,

the projector will automatically shutdown:



“LAMP” LED indicator is lit red and if “POWER/STANDBY”

indicator flashes amber.



“TEMP” LED indicator is lit red and if “POWER/STANDBY”

indicator flashes amber. This indicates the projector has

overheated. Under normal conditions, the projector can be

switched back on.



“TEMP” LED indicator flashes red and if “POWER/STAND-

BY” indicator flashes amber.

Unplug the power cord from the projector, wait for 30 seconds

and try again. If the warning indicator light up again, please

contact your nearest service center for assistance.

Power Off

1. Press the “ ” button on the remote control or

on the control panel to turn off the projector.

The following message will be displayed on the screen.

Press the “ ” button again to confirm otherwise the

message will disappear after 15 seconds. When you press

the “ ” button for the second time, the fan will start cool-

ing the system and will shut down.

2. The cooling fans continue to operate for about 10 seconds

for cooling cycle and the POWER/STANDBY LED will

Flash Green. When the POWER/STANDBY LED lights

solid Amber, the projector has entered standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and

has entered standby mode. Once in standby mode, simply

press “ ” button to restart the projector.

3. Disconnect the power cord from the electrical outlet and

the projector.

4. Do not turn on the projector immediately following a power

off procedure.

Содержание PJ1000 ST DLP






























































Результаты поиска

Содержание PJ1000 ST DLP

Отзывы:

Похожие инструкции для PJ1000 ST DLP

Бренды по названию

Популярные бренды

TRIUMPH BOARD PJ1000 ST DLP, Руководство пользователя

Результаты поиска

Содержание PJ1000 ST DLP

Отзывы:

Похожие инструкции для PJ1000 ST DLP

Бренды по названию

Популярные бренды