TRIUMPH BOARD Mobile Stand with Electric Lift for IFP, Инструкция по использованию и установке

Страница: 11 / 12

LiftBox
®
for 55” LED LCD
Installation manual
11
DIMENSIONS
FAQ: Frequently Asked Que s� ons
A1: Check the power lead is connected to the wall outlet, if not connect the power lead.
A2: Check the cable conne c� ons to the control box Page 10 step 1 and 2, make sure the cables are connected.
A3: Check the conne c� on of the short motor cable to the control box cable, make sure the cables are connected.
the wall outlet and contact your dealer for a replacement or repair.
WARNING: DO NOT ATTEMPT TO REPAIR BROKEN WIRING!
cause over-hea � ng and a safety system will switch the motors o ff , if this happens allow the motors to cool down
for at least 1 hour. The system will automa � cally switch back to normal when the motors have cooled down.
A6: If steps A1 to A4 have been found in order and the problem s �ll exists, contact your dealer for repair of the unit.
B: The motors don’t move smoothly or the le� and right motors are at a di ff erent height
B1: Follow steps 3 to 6 on page 10 to synchronize the motors
C1: Follow the steps 3 to 6 on page 10 to synchronize the motors
C2: If the problem s �l l exists follow steps A1 to A4
A: The Mobile Stand does not move up or down
A5: Mobile Stand motors are intended for intermi�ent use, con�nuous or extended use (more than 6 minutes) will
C: Mobile Stand only moves down and not up:Mobile Stand went into safe-mode, a power cut may have happened
during opera�on, or there is a bad wiring connec�on.
A4: Check for wiring damage from bad assembly: page 5 on step 4: If wiring is damaged, disconnect the device from