© TRIUMPH BOARD
5 z 20
3.2 Device Connection
The Document Camera A405 can be connected to computers by a Universal Serial
Bus (USB) port. A USB cable is included with the product. Simply turn on your computer, and
then connect one end of the USB cable from the USB port on the device, to the other end to the
computer's USB port. Please ensure the USB cable is connected to a
computer’s USB port with
a minimum of USB 2.0 interface on the back when
connecting to a desktop computer, to avoid failure in functioning properly. Once
connected, the system will automatically find the new hardware and identify the
installation driver. No driver is manually needed to be installed for Windows XP or
Windows Vista / 7/8 operating system.
Please note that the video stand connection shown in the picture above is a
schematic diagram, and detailed information is accordant with the final product
4 Software Installation and Interface
CD-ROM Software attached: Image Center_Pro_1.0.7_En
Please make sure the Document Camera A405 is connected to a computer,
and it is identified by the system (no drive is needed) before installing the
software.
4.1 I accept the agreement Software installation
Double-click the package icon to start the installation process
If you are running a 360 Virus protection software, a window may pop up
reminding you that Windows considers this an unknown program. Please
choose
to “allow the program to run” or you can disable or exit your Virus
protection software before you decide to install the Image Center Pro
S
oftware.
