© Copyright 2018 TRIUMPH BOARD
This document contains confidential information which can be used by the recipient only for servicing the above product.
Reproduction or distribution of any content of this document without permission is strictly forbidden.
20
4.
Disassembly Steps
4.1 Tool Preparation
Screw driver, needle-nose pliers, slotted screwdriver (needle-nose pliers and slotted screwdriver are used
in case of any stripped screw or come-off of hexagonal copper pillar).
4.2 Disassembly Procedure
➢
Step 1: Remove the rear shell
1
）
Remove speaker
Take down Φ3×6mm Plating black zinc mechanical screw with meson head (Φ7mm) * 8PCS, release the
speaker bracket and rear shell
，
and then pull out the cable of speaker;
