Triumph Adler DC 2116, Инструкция по эксплуатации

Страница: 14 / 32

Set-up
2-2
Connecting the scanner to your computer network
1 Turn the main switch located on the right side of the
scanner OFF (
{
).
Caution
ALWAYS turn the main switch to the scanner OFF BEFORE connecting the network cable.
2 Connect a 10BASE-T or 100BASE-TX cable to the
scanner interface connector located at the back side
of the right side of the scanner.
Important!
NEVER attempt to remove the Scanner Interface Card.
3 Turn the main switch to the scanner back ON ( | ).