Triumph Adler DC 2028, Инструкция по эксплуатации

Страница: 140 / 435

Sending Functions
OPERATION GUIDE 5-7
5
Duplex Sending
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1
Press the Send key.
2
Place the originals on the platen.
3
Press the Function Menu key. Function Menu
appears.
4
Press the U or V key to select [Duplex].
5
Press the OK key. Duplex appears.
6
Press the U or V key to select [1-sided] or [2-
sided].
If you select [2-sided], press [Detail] (the Right
Select key), select the binding edge and press the
OK key, and then select the original setting
orientation on the next screen.
7
Press the OK key.
Completed. is displayed and the screen returns to
the basic screen for sending.
8
Specify the destination, and press the Start key to
start sending.
Original Type Binding Binding
1-sided Sheet Original 1-sided — —
2-sided Sheet Original 2-sided*
* Only when the optional document processor is installed for
DC 2128
.
Binding Left/Right,
Binding Top Top Edge Top,
Top Edge Left
Function Menu:
a b
*********************
2 Original Size T
3 Original Image T
[ Exit ]
Duplex:
a b
*********************
2 2-sided
[ Detail ]