manualshive.com logo in svg

Triumph Adler CX 8682, Инструкция по эксплуатации


Поделиться
Скачать
background image

CHAPTER 2  NAMES OF PARTS

2-5

1

 APS/AMS key

(Press this key to switch between the auto paper selection mode
and the auto zoom mode. Page 4-4)

2

 100% key

(Press this key to set the magnification ratio to 100% for copying.)

3

 Preset R/E key

(Press this key to change the magnification ratio for copying. Page
5-1)

4

 Message display

(Copy conditions and errors such as a paper jam are displayed
here.
NOTE: When using the copier at a low temperature of lower than
41

°

F [5

°

C], the display may not be clearly seen. In this case, adjust

the contrast using “

5

 Display contrast” of the default setting. Page

7-1)

5

 Original Image Type key

(Press this key to select an original type from normal original, text,
and photo. Proper image processing based on the original type will
be performed. Page 4-2)

6

 Auto Exp. key/indicator

(Press this key to set the exposure automatically. Page 4-3)

7

 Media key

(Press this key to select a paper material from bond paper, vellum,
film, and custom. Page 4-2, 4-5)

8

 Paper Source key

(Press this key to select a paper source from paper source 1
(option), paper source 2, paper source 3, and bypass. Page 4-2)

9

 Cut Size key

(Press this key to select the cut size from the three types: synchro-
nized cut, standard size cut, and numeric key input (custom size).
Page 4-2, 4-6)

0

 */Language key

(Press this key to register a default setting or a program or to
change the language.)

!

 Editing key

(Press this key to use an editing function such as image shift,
margin copy, border erase, mirror, and image rotation. Page 5-5)

@

 Output Adj. key

(Press this key to use inclination adjustment, copy size fine
adjustment or fixing temperature fine adjustment. Page 6-1)

#

 Program Recall key

(Press this key to recall a registered program. Page 6-10)

$

 

▲▼

O

 

P

(cursor) keys

(Use these keys to select a choice in various setting modes. Also
use these keys to change the magnification ratio.)

%

 OK key

(Use to confirm the setting in various setting modes.)

^

 Memory indicator

(Indicates the status of use of image memory.

Lit: Image has been stored in memory.
Off: No image is stored in memory.
Blinking: Image is being stored in memory.)

&

 Repeat copy key/indicator

(Press this key to make repeated copies. Page 6-4)

*

 Add job key/indicator

(Press this key to use the job reserve function. Page 6-7)

(

 Sort/Group key/indicator

(Press this key to select sort or group copy. The Sort/Group
indicator will light up. Page 5-12)

)

 Interrupt key/indicator

(Press this key to interrupt copying. The Interrupt indicator will light
up. Page 6-11)

⁄

 Preview Copy key/indicator

(Press this key to make a sample copy. The Preview Copy indicator
will light up. Page 6-6)

¤

 Energy Saver key/indicator

(Press this key to enter or exit the energy saver mode. The Energy
Saver indicator will light up. Page 4-1)

‹

 Start key

(Press this key to start scanning or output.)

›

 Reset key

(Press this key to cancel the preset functions. Image data stored in
the image memory will also be cleared.)

fi

 Stop/Clear key

(Press this key to clear the number of copies or to stop copying in
progress.)

fl

 Light/Dark indicators

(Indicate the status of the manual exposure mode.

Light indicator is lit: standard light mode
Dark indicator is lit: standard dark mode

Page 4-3)

‡

 Copy contrast indicators

(Indicate the copy contrast in the manual exposure mode. Left
indicators indicate lighter exposure levels and right indicators
indicate darker exposure levels.)

—

 Copy contrast keys

(Press to adjust the copy contrast in the manual exposure mode.
Page 4-3)

·

 Scan indicator

(Indicates the status of scanning of originals.)

Lit: Scanning is possible.
Off: Scanning is impossible.
Blinking:  An original is being scanned.)

‚

 Copier/Printer/Scanner key/indicator

(Press this key to switch to the printer or scanner mode when an
optional interface unit is installed. The indicator will light up.)

Œ

 Numeric keys

(Press these keys to enter the number of copies or other numerical
values.)

„

 Roll Cut key

(Press this key when a new paper roll is set. Also press to cut
paper roll by force during output and to cancel copying. Page 4-2,
4-6)

´

 Scan stop key

(Press this key to stop immediately transfer of originals. Page 4-9)

Содержание CX 8682







































































































Отзывы:

Нет отзывов

Похожие инструкции для CX 8682

Labelmate MC-11 User Manual preview
MC-11
Бренд: Labelmate Страницы: 2
MEFA MEFA-15 Quick Start Manual preview
MEFA-15
Бренд: MEFA Страницы: 2
Quest Payment Systems Donation Point Even Quick Start Manual preview
Donation Point Even
Бренд: Quest Payment Systems Страницы: 2
Konica Minolta bizhub 160 Service Manual preview
bizhub 160
Бренд: Konica Minolta Страницы: 20
GCC Technologies JV-240UV User Manual preview
JV-240UV
Бренд: GCC Technologies Страницы: 97
Olivetti PGL 12EN Operator'S Manual preview
PGL 12EN
Бренд: Olivetti Страницы: 139
Edimax PS-1208MFg User Manual preview
PS-1208MFg
Бренд: Edimax Страницы: 93
Garment Printer Ink V16 Automatic Shaker Unit Installation, Operation & Maintenance Manual preview
V16 Automatic Shaker Unit
Бренд: Garment Printer Ink Страницы: 21
Intellisystem ThermalTronix TT-1260S-UTCM User Manual preview
ThermalTronix TT-1260S-UTCM
Бренд: Intellisystem Страницы: 18
Pantum L2710 Series User Manual preview
L2710 Series
Бренд: Pantum Страницы: 164
Mitsubishi CP-9500DW Features And Specifications preview
CP-9500DW
Бренд: Mitsubishi Страницы: 2
Xerox N2125N - DocuPrint B/W Laser Printer Service Manual preview
N2125N - DocuPrint B/W Laser Printer
Бренд: Xerox Страницы: 335
WANHAO Duplicator 5 User Manual preview
Duplicator 5
Бренд: WANHAO Страницы: 18
Hitt Marking Devices POROUS Owner'S Manual preview
POROUS
Бренд: Hitt Marking Devices Страницы: 27
Kuhling&Kuhling RepRap Industrial Operating Manual preview
RepRap Industrial
Бренд: Kuhling&Kuhling Страницы: 24
CognitiveTPG Blaster ADVANTAGE User Manual preview
Blaster ADVANTAGE
Бренд: CognitiveTPG Страницы: 20
Ricoh HQ Opal Operating Instructions Manual preview
HQ Opal
Бренд: Ricoh Страницы: 88
Kyocera PF-100 Service Manual preview
PF-100
Бренд: Kyocera Страницы: 44

Бренды по названию

Популярные бренды

Загрузить еще бренды