XM894-V1.0-NR
21
8.7.2 Edit program
With this function, you can edit the internal programs.
8.7.3 Edit scenes
With this function, you can edit the scenes of the internal programs.
8.7.4 Rec. Controller
The moving head features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the desired scene
numbers via the encoder (from – to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start
3 different Slave units, which run 3 different programs. The Master unit sends the 3 program
parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit
was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit
sends “Auto Program Part 1” to the Slave unit. If set to “Slave 2”, the Slave unit receives “Auto
Program Part 2”.
To start a Auto Program please proceed as follows:
1. Slave-Setting
•
Select “Function Mode” by turning the encoder.
•
Press the Enter button to confirm.
•
Select “Set to slave” by turning the encoder.
•
Press the Enter button to confirm.
•
Turn the encoder to select “Slave 1”, “Slave 2” or “Slave 3”.
•
Press the Enter button to confirm.
•
Press the MODE/ESC button in order to return to the main menu.
2. Automatic Program Run
•
Select “Function Mode” by turning the encoder.
•
Press the Enter button to confirm.
•
Select “Auto Program” by turning the encoder.
•
Press the Enter button to confirm.
•
Turn the encoder to select “Master” or “Alone”. The selection "Alone" means Stand
Alone-mode and "Master" that the device is defined as master.
•
Press the Enter button to confirm.
•
Press the MODE/ESC button in order to return to the main menu.
3. Program selection for Auto Pro Part
•
Select “Edit program” by turning the encoder.
