
-
8
- XM155 V1.0 NR
display located on the base of the device.
You can set the same starting address for all fixtures or a group of fixtures, or make different address
for each fixture individually.
If you set the same address, all the units will start to “listen” to the same control signal from the same
channel number. In other words, changing the settings of one channel will affect all the fixtures
simultaneously.
If you set a different address, each unit will start to “listen” to the channel number you have set,
based on the quantity of control channels of the unit. That means changing the settings of one
channel will affect only the selected fixture.
In the case of the moving head, which is 16 channels fixture, you should set the starting address of
the first unit to 1, the second unit to 17(16 + 1), the third unit to 33 (16+ 17), and so on.
Control Board
The Control Board offers several features: you can simply set the starting address, switch on and off the lamp, run
the pre-programmed program or make a reset.
The main menu is accessed by pressing the
Mode/esc
-button until the display starts flashing. Browse through the
menu by pressing the
Up
-button or
Down
-button. Press the
Enter
-button in order to select the desired menu. You
can change the selection by pressing the
Up
-button or
Down
-button. Confirm every selection by pressing the
Enter
-button. You can leave every mode by pressing the
Mode/esc
-button. The functions provided are described in
the following sections.
Default settings shaded
Fu
nc
ti
on
M
od
e
Set DMX Address
Value Display
Set To Slave
Auto Program
Music Control
A001~AXXX
PAN Moving……
Slave1,Slave2,Slave3
Master / Alone
Master / Alone
DMX address setting
DMX value display
Slave setting
Auto program
Music control
Time Information
Current Time
Total Run Time
Total Lamp Time
Lamp Off Time
Clear Lamp Time
XXXX(Hours)
XXXX(Hours)
XXXX(Hours)
XXXX(Minute)
ON/OFF
Power on running time
Fixture running time
Lamp running time
Lamp off time
Clear lamp time
Temperature Info
Base Temperature
Head Temperature
XX
℃
/
℉
XXX
℃
/
℉
Temperature on the display
board of the base
Temperature in the head
In
fo
rm
at
io
n
Software Version
Ver1.0
Software version of each IC
La
m
p
C
on
tr
ol
Lamp On or Off
Automatic La-On
Lamp On Via DMX
Lamp Off Via DMX
Lamp Off No DMX
Lamp On at Temp.
Lamp Off at Temp.
ON/OFF
ON/OFF
ON/OFF
ON/OFF
OFF, 0FF~19M
20~79
℃
,45
℃
/68~174
℉
113
℉
80
~
139
℃
,
130
℃
/176~282
℉,
266
℉
Lamp on/off
Lamp on/off when Power
on
Lamp on via DMX
Lamp off via DMX
Lamp off if no DMX
Lamp restart at temp.
Lamp off at temp.