General Safety Rules
5
Read and understand all
instructions. Failure to follow all
instructions listed below, may result
in electric shock, fire and/or serious
personal injury.
The term “power tool” in all of the
warnings listed below refers to your
mains-operated (corded) power tool
or battery operated (cordless)
power tool.
SAVE THESE
SAFETY INSTRUCTIONS
•
Keep your work area clean
and well lit.
Cluttered benches
and dark areas invite accidents.
•
Do not operate power tools
in an environment where
explosive or corrosive gases
could be present.
Power tools
create sparks which may ignite
fumes. Avoid areas where there
is excessive dampness or humidity.
•
Keep children, bystanders and
visitors away while operating
the power tool.
Distractions can
cause you to lose control.
•
Always set up or fix the tool
in a stable position.
ELECTRICAL SAFETY
•
Power tool plugs must match
the outlet.
Never modify the plug
in any way. Do not use any adaptor
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
•
Avoid body contact with
earthed grounded surfaces
such as pipes, radiators, ranges
and refrigerators.
There is an
increased risk of electric shock if
your body is earthed or grounded.
•
Do not expose power tools to
rain or wet conditions.
Water
entering a power tool will increase
the risk of electric shock.
•
Do not abuse the cord.
Never use the cord for carrying,
pulling or unplugging the power
tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
•
When operating a power tool
outdoors, use an extension
cord suitable for outdoor
use.
Use of a cord suitable for
outdoor use reduces the risk
of electric shock.
•
Never yank the cord to
disconnect if from socket.
Keep the cord away from heat
and sharp edges.
PERSONAL SAFETY
•
Stay alert, watch what you are
doing, and use common sense
when operating a power tool.
Do not use tool while tired or
under the influence of drugs,
alcohol, or medication. A moment
of inattention while operating
power tools may result in serious
personal injury.
GENERAL SAFETY RULES
1.
Trigger switch
2.
Forward / reverse switch
3.
Hex drive
4.
Charger connection point
5.
Charge indicator
6.
Charger
7.
Driver bits:
8.
Magnetic extension
FEATURES
1
2
Bits
Qty
Sizes
Slotted (50mm)
1
#6
Philips (50mm)
1
#2
Philips (25mm)
4
#0, 1, 2, 3
Slotted (25mm)
4
#4, 5, 6, 7mm
Hex (25mm)
4
#3, 4, 5, 6mm
Star (25mm)
4
T15, T20, T25, T30
3
5
Features
4
4
6
7
8
