Triton RSA300 Скачать руководство пользователя страница 5

5

Operation

Switchbox operation

IMPORTANT:

 When connecting power tools to the switchbox do not exceed 

10A (2300W)
•  Practise switching on and off before connecting the power
•  Press the power switch with your finger to switch the power ‘ON’. Tap the 

stop plate with your hand or leg to switch ‘OFF’

•  Make sure the switch is ‘OFF’, plug your power tool into the switchbox 

inside the front panel, and use an extension cord to connect the switchbox 
to mains power

Note:

 The extension cord used must have a minimum rating of 10A. 13A 

recommended

Storing the legs

•  The legs have a convenient on-board storage location
•  Loosen the Round Knobs (7) and remove the legs from their sockets
•  Slide the Front Legs (4) inside the Rear Legs (5), ensuring that the holes in 

each crossbar line up

•  Insert the legs through the cut-outs in the rear panel and into the cut-outs 

in the front panel with their holes facing outwards (D)

•  Engage the holes in the legs over the tabs on the rear panel cut-outs and 

rotate the latches to lock the legs in position (D)

Accessories

•  A wide range of accessories are available from your Triton dealer. Spares 

can be ordered through your Triton dealer or www.toolsparesonline.com.

Wheel Kit

•   The Triton Retractable Wheel Kit (AWA100) fits this Router Table Stand for 

convenient mobility

•   When fitting the Retractable Wheel Kit to the rear legs, ensure the wheels 

are not fitted to the same side as the holes in the legs

Maintenance

WARNING

: ALWAYS disconnect the tool from the power supply, before 

cleaning or carrying out maintenance.

General inspection 

•  Regularly check that all the fixing screws are tight. They may vibrate loose 

over time

Lubrication

•  Lubricate all moving parts with a suitable lubricant spray, at regular 

intervals

Guarantee

To register your guarantee visit our web site at   
www.tritontools.com* and enter your details.
Your details will be included on our mailing list (unless indicated other-
wise) for information on future releases. Details provided will not be made 
available to any third party.

Purchase Record

Date of Purchase:       ___ / ___ / ____
Model:    RSA300      Retain your receipt as proof of purchase 

art pr

Triton Precision Power Tools guarantees to the purchaser of this product 
that if any part proves to be defective due to faulty materials or workman-
ship within 3 YEARS  from the date of original purchase,  
Triton will repair, or at its discretion replace, the faulty part free of 
charge.
This guarantee does not apply to commercial use nor does it extend to 
normal wear and tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights 

oves to be defecti

Warranty

Our goods come with guarantees that cannot be excluded under the Australian 
Consumer Law. You are entitled to a replacement or refund for a major failure and 
for compensation for any other reasonably foreseeable loss or damage. You are also 
entitled to have the goods repaired or replaced if the goods fail to be of acceptable 
quality and the failure does not amount to a major failure.
This product is covered by a 36 month warranty.
This warranty will not apply:
(i)   where this product has been subjected to misuse, abuse, accident or want of  
 care;
(ii)   where this product has been used for a purpose for which it was not designed or  
 

is not suited;

(iii)  where the service of this product has been undertaken by a non-authorised  
 

person or company or if non-approved parts have been used;

(iv)  where this product has been used for industrial purposes.
Should service become necessary during the warranty period, the purchaser should 
contact an Authorised Service Centre or White International. In order to obtain 
warranty service, the purchaser must present the store receipt showing the name of 
the retailer and the date of purchase.

The period of the warranty begins from the original date of purchase, notwithstanding 
any subsequent repair or parts replacement.
Purchaser shall be responsible for all transport charges to and from the Authorised 
Service Centre.
Damage in transit is not covered by this warranty. The purchaser should remove from 
the product any liquids (if applicable) before sending the tool for service or repair. The 
tool should be packed securely to prevent damage.

Warranty Exclusions 

Wear parts or service related parts required when performing normal and regular 
maintenance of this product are not covered by warranty unless it is found to be 
defective by an Authorised Service Centre. These include, but are not limited to: Blades
Distributed in Australia by White International.
PO Box 304 Milperra LPO, NSW Australia, 2214
Ph:1800 251 338
The White International Policy is one of continuous improvement and the company 
reserves the right to alter designs, colours and specifications without notice

616851_Z1MANPRO1.indd   5

21/03/2016   09:37

Отзывы: