Installation & Assembly Instructions
Please contact our Customer Service Division with any questions at:
30700 D Carter Street ∙ Solon, OH 44139 ∙ (P) 440.248.5480 ∙
For a full line of products visit
www.tritonproducts.com
2
INLBD2119
5.
Insert plastic wall anchors in each hole drilled in Step 4 except where you drilled 7/64” pilot hole for wood stud.
6.
Align mounting holes in wall surface with screw holes in back flanges. Insert machine screws through the front
square opening and into pre-installed plastic wall anchors. Tighten all screws. The head of each screw should not
be visible and will be tight against inside surface of each mounting flange.
Hook Installation
: Insert hook’s back locking tabs into front square openings of tool board, slide securely
into place and complete by installing the required number of LocScrews.
Each LocHook has the unique capability of being securely mounted vertically or horizontally.
LocBoard must be securely fastened to sound wall structures to support heavy loads.
For questions or installation help Contact Triton Products Directly at 440-248-5480
