Triton CAROLI, Руководство пользователя

Страница: 11 / 24

Caroli Bar Mixer Shower
11
*VARIABLE FITTINGS
The supply pipes can be routed from the side,
rising, rear or falling and must end in suitable
fittings to accept the variable connectors
(fig.9) .
The variable connectors can be used to connect
to ½” BSP female elbow fittings in solid wall
installations. The inlet centres on the variable
connectors have a degree of adjustment to allow
for misalignment of pipe work.
The hot and cold supply pipes
MUST be
anchored rigidly to support the mixer shower
and stop any movement after installation.
MAKING GOOD
Make good the wall and complete the tiling.
NOTE: It is advised to use a suitable sealer
around the variable connector where it enters
the wall to stop water ingress
(fig.10) .
Fig.10
Fig.9
Seal around
the variable
connectors
Appropriate
end fitting
Once the trim
is fitted, there
MUST be a
minimum of
7mm of thread
to allow the
mixer to be
fitted correctly.
7mm