background image

2

GB

Contents / Symbols / Garantee

CONTENTS

Thank you for purchasing this Triton tool. These instructions contain information necessary  

for safe and effective operation of this product.  

Please read this manual to make sure you get the full benefit of this unique Triton product.

Keep this manual close to hand and ensure all users of this tool have read and fully understand the instructions.

Symbols

 

2

Parts List

 

3

Safety

 

4

Setting Up

 

6

Guarantee

 

2

SYMBOLS

ENVIRONMENTAL PROTECTION

Waste electrical products should not be 

disposed of with household waste. Please 

recycle where facilities exist. Check  

           with your local authority or retailer for    

           recycling advice. 

Always wear ear, eye and respiratory 

protection.

WARNING. To reduce the  

risk of injury, user must read instruction 

manual
 

 

Instruction warning. 

 

To register your guarantee visit our web site at  

www.tritontools.com* and enter your details.
Your details will be included on our mailing list 

(unless indicated otherwise) for information on 

future releases. Details provided will not be made 

available to any third party.

PURCHASE RECORD

Date of Purchase:       ___ / ___ / ____

Model:    AJA150

Serial Number:  __________________ 

 

Retain your receipt as proof of purchase

Hand-Held Operation

Triton Precision Power Tools guarantees 

to the purchaser of this product that if 

any part proves to be defective due to 

faulty materials or workmanship within 12 

MONTHS from the date of original purchase, 

Triton will repair, or at its discretion replace, 

the faulty part free of charge.
This guarantee does not apply to 

commercial use nor does it extend to 

normal wear and tear or damage as a result 

of accident, abuse or misuse.
* Register online within 30 days.
Terms & conditions apply.
This does not affect your statutory rights

GUARANTEE

Содержание AJA150









Отзывы: