Triton 10.5kW, Инструкция по установке и эксплуатации

Страница: 20 / 28

20
Electric shower
CLEANING THE FILTER
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by a competent person.
SWITCH OFF the electricity and water supply at
the mains.
The inlet filter is situated in the bottom of the
inlet pipe
(fig.20) .
To gain access to the filter, remove the trimplate
and then unscrew the retaining nut from the
bottom of the inlet pipe.
When cleaning the filter,
DO NOT
use a sharp
object as it will cause damage. It is preferable to
use an old toothbrush or similar.
To reassemble, follow the procedure in reverse.
DO NOT over tighten the fittings on reassembly.
Instructions for installers and service engineers only
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Filter and
‘O’ ring
Incoming
pipework
Fig.20