NEXT
<32PCS
A
.
Package
DMX-LED COLOR PICKER x 1
USER
Manual x 1
B.
Installation
Please hang this light into the suitable place with suitable angle (if operate this light in external place,
please remember to get some water-proof cover to protect them)
To connect the cable and put into power, then the light stay in the status to receive the operating
signal like: music, Automatic, DMX512 etc.
Take note:
Please cut off the power line if you will not
operate it for a certain time.
To connect the signal cable, plug one side into IN socket in the back of light and plug another side
into OUT signal connector in the DMX512 board, (signal input:
1=>Ground
,
2=>data-, 3=>data+ )
C
Function
D
Working place
Indoor,
temperature:
-20-- 45
humidity
0
90
Connecting the device
1. Power supply: AC 230V / 50Hz
2. Fuse: 5 x 20mm F0.5A
3. Signal input: XLR connector connected with a DMX512
control panel.
4. Signal output: XLR connector connected with next light.
5. DMX-address switches: Stand alone function or DMX setting.
E. Setup state of automation, method of dialing address:
Please read the following picture
1 2 3 4 5 6 7 8 9 10
ON
ON
OFF
Function:
1,2,3
4,5,6,7,8,9,10
Red lasting lighted
4,5,6
1,2,3,7,8,9,10
Green lasting lighted
7,8
1,2,3,4,5,6,9,10
Blue lasting lighted
7,9
1,2,3,4,5,6,8,10
Transform 7 colors automatically
1,9
(1,2),3,9
2,3,4,5,6,7,8,10
4,5,6,7,8,10
Flash frequently from red, green to blue
Slowly change color (It is can control its speed
with the 1st and 2nd switch..
F, Setup state of DMX, method of dialing address:
Please read the following picture
1 2 3 4 5 6 7 8 9 10
ON
ON
OFF
Function:
1,10
2,3,4,5,6,7,8,9
Choose 1st channel
2,10
1,3,4,5,6,7,8,9
Choose 2nd channel
1,2,10
3,4,5,6,7,8,9
Choose 3rd channel
3,10
1,2,4,5,6,7,8,9
Choose 4th channel
........
As analogy, choose the address as you want
........................
*
.Setup synchronization state of principal and subordinate machine, method for dialing address:
One set of host machine setup function by method of setting auto state and dialing address.
All other coordinate machines set to DMX state on 1st channel. Each of the light should be
connected in series by connect wires.
G. 4 DMX CHANNELS
Channels FUNCTION:
Channel 1 -------------- Dimmer/Strobe
Channel 2 -------------- Red
Channel 3 -------------- Green
Channel 4 -------------- Blue
TECHNICAL FEATURES
Voltage
AC230V/50Hz Fuse: 0.5A
Power
6W max at full intensity (full RGB)
Beam Angle : 60
Small packing
Packing
1set/carton
Size
19.5x14x14cm
Gross/Net weight
1/0.8Kg
Big packing
Packing
8set/carton
Size
41x30x30cm
Gross/Net weight
9/8Kg
Spanish
English
A. Embalje
1. Par36 LEDs---------1PC
2. Manual de intrucciones-------1PC
B. Montaje
Colgarel Par 36 y colocarlo en posicion recta
Conecte la senal. Colocar la senal en el conector marcado como INPUT en la parte trasera de
proyector Y el conector marcado como OUTPUT sirve para dar la senal DMX al siguiente
proyector(1=>Ground, 2=>data-, 3=>data+ )
SIGUIENTE
(Mirar el dibujo de instalacion)
C
Funcionamiento
1.Entrada de corriente: AC 230V / 50Hz
2.Porta fusibles: 5 x 20mm F0.5A
3. Conector entrada: connected with a DMX512 control panel.
4. Conector salida: connected with the next light.
5. Switch de direccion Amiento.
D
Mantenimiento
Interior
Temperatura:
-20-- 45
Humedad
0
90
