TR-SRL-574
English
Pag. 11
16, the relevant channel LED lights indicating MIDI OUT channel is set.
5.3 Exit MIDI Setting
Press and hold down the Record button. While holding down the Record button
tap the Rec Exit button to exit MIDI setting.
5.4 Receiving MIDI File Dump
Tap the Flash button 3 three time while holding down the Record button, the
Segment Display reads “IN” indicating the controller is ready to receive MIDI
file dump.
5.5 Sending MIDI File Dump
Tap the Flash button 4 three time while holding down the Record button, the
Segment Display reads “OUT” indicating the controller is ready to send a file.
NOTE:
1) During file dump, all other operations will not function. Functions will
automatically return when the file dump is completed.
2) File dump will be interrupted and stop if errors occur or power failure.
5.6 Implementation
1) During receiving and sending MIDI data, all MIDI scenes and channels
being run will automatically paused if there is no response within 10
minutes.
2) During receiving and sending file dump, the controller will automatically
search for or send Device ID of 55h(85), a file named DC2448 with an
extension of “BIN(SPACE)”.
3) File dump allows this controller to send its MIDI data to next unit or other
MIDI devices.
4) Threr are two types of file dump mode described as below:
CONTROLLER
CONTROLLER
Open Loop Mode
Close Loop Mode
RECEIVER
RECEIVER
MIDI OUT
MIDI OUT
MIDI OUT
MIDI OUT
MIDI IN
MIDI IN
MIDI IN
MIDI IN
5) The controller will send and receive Note On Off data via the Flash
buttons.
NOTE NUMBER
VELOCITY
FUNCTION
Decimal
Hex
22-69
[16H-45H]
Program master
Turn on or off
program 1-24
