-
６
- XM089-V1.0-NR
Screw one clamp each via a M12 screw and nut onto the Omega holders.
Insert the quick-lock fasteners of the first Omega holder into the respective holes on the bottom of
the device. Tighten the quick-lock fasteners fully clockwise. Install the second Omega holder.
Pull the safety-rope through the holes on the bottom of the base and over the trussing system or a
safe fixation spot. Insert the end in the carabine and tighten the safety screw.
Control via the DIP Switches
Please refer to the picture below:
Please note: The dip switch 9 is “ON”.
Intensity & speed or MIC sensitivity adjustment at back of the strobe
