19
TRI93.134.5
www.tritium.com.au
Veefil®isaregisteredtrademarkofTritiumPtyLtd.©2015TritiumPtyLtd
5. Remove service covers
EXPLODED VIEW
Service
Cover
Service
Hatch
FRONT VIEW
Remove the service hatch and cover to
access the internal enclosure to prepare
the Veefil for wiring.
The Service Hatch has an attached
gasket. Ensure this is carefully stored to
avoid damage or accumulation of debris.
The wiring diagram is on the inside of the
Service Hatch and also in this manual.
4. Disconnect front panel
There are three points to disconnect:
1. Wiring to the top rear panel.
Squeeze the connector to disconnect.
2. Earthing strap.
Unscrew the bolt on the metalwork.
Remove the bolt, earthing strap and
washers.
3. Connector ‘B’ on the HMI panel.
Connector ‘B’ detaches by squeezing the
connector front and rear with your fingers
and pulling down.
1
2
3
Fix to ground & feed power
