8
Red Steam Express™ | Model: SQ2-U1
Red Steam Express™ | Model: SQ2-U1
9
Using the Red Steam Express
TM
Settings
Note:
•
The lint brush is designed for clothes, neckties and fabrics (see FIG. 6).
•
The bristle brush is designed for curtains and sofas (see FIG. 7).
•
The anodized aluminum plate brush is designed for steam ironing low
temperature fibers such as nylon, acetate, silk, and wool (see FIG. 8).
How to Fill Water Tank
Unplug the appliance and push the steam knob to the dry position.
Open fill cover, use the beaker to slowly pour tap water into water tank up
until MAX fill line has been reached and then close the fill cover. Do not fill
the appliance directly from the faucet (see FIG. 9).
Steam Ironing
a. Fill water tank following directions in “How to fill water tank.”
b. Place the appliance on a stable, level ironing board or on its stand.
c. Plug the appliance into the main socket and push the continuous
steam knob to the dry position. (see FIG. 10).
d. Turn temperature control dial to the MAX temperature setting.
The red power light will turn on. Allow 2 minutes for iron to reach
the desired temperature.
e. Push the steam knob to steam position for steam ironing (see FIG. 11).
f. After use, turn temperature control dial to MIN position, unplug the
appliance from main socket, empty the remaining water from water tank.
g. Store the appliance after it has completely cooled down.
FIG. 6
FIG. 9
FIG. 7
FIG. 8
FIG. 10
FIG. 11
Fabric Setting Chart
Steam Setting
Temperature Setting
Ironing Instructions
MIN
MIN
–
Nylon/Acetate
Dry iron with temperature control dial set at low
temperature setting. Such as nylon/acetate.
Silk/Wool
Dry iron with temperature control dial set at
middle temperature setting, such as silk/wool.
Steam iron with temperature control dial set at
low temperature setting.
Max/Cotton
Steam iron or dry iron with temperature control dial
set at high temperature setting, such as cotton.
Note:
•
The machine works with normal
tap water.
•
If the water is very hard,
we recommended using
demineralized water diluted 50/50
with tap water.
•
Never use distilled water alone.
•
Never use chemical substances or
detergents (e.g. perfumed water,
essence, descaling solutions, etc.)
