Instruction manual
5
PARTS DESCRIPTION
1. Control panel
2. Air outlet
3. Water level indicator
4. Caster wheel
5. Remote control
6. Ice boxes
Remote control
•
2xAAA size batteries are required.
•
Ensure batteries are inserted in the correct direction.
•
When replacing, ensure both batteries are changed
simultaneously.
•
Press the corresponding buttons as explained in the use part to
operate the cooler.
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the
local voltage before connecting the
device. Voltage 220V-240V 50Hz)
•
Fill the water tank. See picture below for instructions.
•
To increase the cooling effect, you can put the frozen ice boxes
in the water tank.
USE
•
Press the on/off button to turn the fan on or off.
•
Press the speed button to select the desired airflow
speed. There are three levels to choose from (high, medium and
low speed).
•
Use the swing button to turn on the oscillation mode. The
airflow will now move from side to side. Press the button again to
turn it off.
•
When the unit is in on, press the timer button repeatedly
to have the fan automatically stop after 0.5 to 7.5 hours.
EN
