7
Copyright © 2016 TripSpark Technologies, its subsidiaries and affiliates. All rights reserved.
Introduction
TripSpark Ranger v4.0 is a Windows CE fixed-mount computer for two-way wireless communication,
electronic dispatching, in-vehicle navigation, and more.
This Ranger Installation guide includes directions for successfully installing and interfacing a Ranger into
a vehicle. Specific wiring and installation procedures may change from customer to customer and should
be discussed prior to installation.
If any questions remain after reading this guide, please contact Customer Care at 1-877-411-8727 for
more information.
Before you Begin
Cautions
a.
Carefully read the Installation Guide before installing this product. If anything is unclear please
contact TripSpark for support.
b.
Ensure that the NEGATIVE battery connection is disconnected before beginning work.
NOTE: Some components may lose short-term memory (i.e. engine or transmission adaptive
parameters, and radio presets) after a protracted time without battery power.
c.
Ranger should be serviced by qualified, trained personnel only. Attempting to remove the cover
or disassemble the device could expose you to dangerous high voltage points.
d.
Do not attempt to install or operate a damaged device. If the unit has been exposed to excessive
amounts of water; shows evidence of physical damage; or is not operating properly; unplug it
from the power source and contact qualified service personnel.
